Samsung M8800L user Code Read done by z3x

Samsung M8800L user Code Read done by z3x 

select model M8800
Press read code...

 UNLOCK INSTRUCTIONS:
    UART cable:
  1. Phone must be powered on.
  2. Connect the phone to UART cable.
  3. Choose correct COM port in port settings.
  4. Check security type ('Old Security' or 'New Security').
  5. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.
    USB cable with 'Old Security' option:
  1. Phone must be powered on.
  2. Type *#782872# to switch phone to Qualcomm USB mode,
     (after operations you can enter *#726872# to switch back to Samsung USB mode.)
  3. Connect USB cable, install drivers.
  4. Select diagnostic port in port settings.
  5. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.
  If you got 'Calculating ... error' or 'Reading sysinfo ... access denied' errors,
  then you must check 'New security' option.
    USB cable with 'New Security' option:
  1. Phone must be powered on.
  2. Type *#726872# to switch phone to Samsung USB mode.  
  3. Connect USB cable, install drivers.
  4. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.

Operation: Read User Lock
Selected model: GT-M8800
Selected port: COM8 MediaTek PreLoader USB VCOM Port

Software version: 23.8
Searching Samsung modem

           read code- 2017

Done with Samsung Tool PRO v.23.8