LAVA E-Tab Z7H Tablet Not Booting Done How TO
Requirements
1. SD Card (It will be formatted, Please backup your data)
2. SD Card Reader
3. Your PC
4. Your Tablet
5. Data Cable
1. SD Card (It will be formatted, Please backup your data)
2. SD Card Reader
3. Your PC
4. Your Tablet
5. Data Cable
2. Extract the "Flash tool umedia tablet.zip".
3. Open the "PhoenixCard.exe".
4. Click on "Image File" & browse to where you have downloaded the image file "LAVA_Z7H_S005_20120829_withoutcontent.img".
5. Insert your sd card to the card reader & insert in the usb port of your PC.
6. Click on "Format to Normal", then click Burn.
7. After finished the above step completely remove the SD Card from card reader & insert it in your tablet. Make sure the tablet is off. Then power on it.
OR
Insert a small pin in the reset hole.
8. Now you can see a red progress bar moving. After it is completed the tablet will be switched off.
9. Now remove the SD Card and Turn on you tablet.
3. Open the "PhoenixCard.exe".
4. Click on "Image File" & browse to where you have downloaded the image file "LAVA_Z7H_S005_20120829_withoutcontent.img".
5. Insert your sd card to the card reader & insert in the usb port of your PC.
6. Click on "Format to Normal", then click Burn.
7. After finished the above step completely remove the SD Card from card reader & insert it in your tablet. Make sure the tablet is off. Then power on it.
OR
Insert a small pin in the reset hole.
8. Now you can see a red progress bar moving. After it is completed the tablet will be switched off.
9. Now remove the SD Card and Turn on you tablet.
10. Bingo!! You got your new Tablet
Produce-
Direct Download this two zip files.
1
0 Comments