iPhone Firmware Files iOS 11.1.2

iPhone Firmware Files iOS 11.1.2





iOS 11.1 Download IPSW Direct Links


Below you can find the direct links to the iPhone Firmware Files for every released firmware version. Please note that if you use Safari you must disable the auto unzip feature. It may be easier to just use Firefox!

iOS 11.1.2 Release Notes

Notes accompanying the download for iOS 11.1.2 are as follows:
iOS 11.1.2 includes bug fixes for your iPhone and iPad. This update:
-Fixes an issue where the iPhone X screen becomes temporarily unresponsive to touch after a rapid temperature drop
– Addresses an issue that could cause distortion in Live Photos and videos captured with iPhone X
For information on the security content of Apple software updates, please visit this website:
https://support.apple.com/kb/HT201222
Presumably the software update includes bug fixes or security enhancements for other devices as well, otherwise it’s a bit of a mystery why iPhone X specific updates would arrive for iPad users and other iPhone models too.

How to-




Manual You Can Update your IOS 11.1.2 Without PC.

1, Turn on the Device

2, Start at your Home screen

3, Tap Settings connect your iPhone with Wi-Fi

4, Your Battery will be more then 50%

5, Tap Settings > General > Software Update.

6, and then you find "download and install"(51.4MB)

7, click on "download and install"

8, you find "Terms and Conditions" click on Agree > Downloading will be start

9, downloading will be complete in few minutes

10, your device will restart

11, software will install wait few minutes and you get your device ready
Read more ...

Huawei HiSilicon VID12D1 PID3609 dead boot repair support added

Huawei HiSilicon VID12D1 PID3609 dead boot repair support added


Smart-Clip2 Software v1.26.13 is out! 



You can find manuals and drivers here.
Board software files: Boot-Loader.com -> downloads -> Smart-Clip2 -> Huawei -> Board software



HiSilicon Tab:

Released REPAIR feature for bricked Huawei smartphones based on HiSilicon,
that still can be detected as VID12D1 PID3609 (HUAWEI USB COM 1.0) in the System.


Procedure:
1. Repair bricked device using board software file taken from Boot-Loader.com
2. Flash the device in Fastboot mode using update.app firmware
3. Repair Vendor/CountryIMEI and other numbers
4. Repeat flashing in Upgrade mode using update.app firmware to finalize repair operation
Read more ...

Xiaomi Test Point collection

Xiaomi Test Point collection



Test poin untuk Redmi 1S
Test Point Redmi 2
Test Poin Redmi 3/Pro/Prime



Test Poin Redmi 3X/S/S Prime





Test Point Mi 2


Test point Mi 3


Test Point Mi4
Test Poin Mi 5


Test Poin Redmi Note 4G
Test Point Mi Note
Test Poin Redmi Note 3 Pro
Test Poin Xiaomi Mi 5s

redmi 4 prime


Read more ...

Huawei Y600-U20 V100R001C435B012 flash file

Huawei Y600-U20 V100R001C435B012 flash file


 Y600-U20 Official 1000% Tested Stock firmware rom for free. Remember this Firmware was tested by needrombd officially. so you can flash your Huawei y600-u20 faithfully.

Version: V100R001C435B012

Y600-U20V100R001C467B002SP03.rar

  • ROM version: Android 4.2
Religion: Oman,United Arab Emirates,Bahrain,Kuwait,Saudi Arabia,Pakistan,Qatar,Iraq,Iran
How to Flash
Step 1: Download and extract with winrar the stock Rom on your computer.
Step 2: After extracting you will find the Firmware file, SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers.skip if drivers are already installed on your computer.
Step 4: Open the SP Flash Tools and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Cable.
Step 6: Click on Upgrade or Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Sign will appear at the screen and device will successful Flash.

Redirect download

Read more ...

bytwo N360big mtk650 7.0 flash file

bytwo N360big mtk650 7.0 flash file 



MT6580__Bytwo__N360big__Bytwo__7.0__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

Info-

Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 70010056313030303850068FFF70C2C9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 70010056313030303850068FFF70C2C9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB [eMMC 8 GiB]
DEV RID    : 0xF07BBA2E5BC7E4E3206C40806AFF4DD6
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Bytwo
ProdName  : N360big
ProdModel : N360big
Device    : Bytwo
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

[Read Ok] : preloader_yuanda6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / yuanda6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1376 MiB
Scatter saved to : H:\MT6580__Bytwo__N360big__Bytwo__7.0__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2\

Read more ...

ios 11.0.2 released free download

ios 11.0.2 released free download



AirPort Express Firmware Update 6.1.1 Raw firmware · AirPort Extreme Firmware Update 5.5.1 RawFirmware · MacBook Air Flash Storage Firmware

Download 
Download current and previous versions of Apple's iOS Firmware and receive push notifications when new firmwares are released.

11.0.2 (5s GSM): iPhone_4.0_64bit_11.0.2_15A421_Restore.ipsw
11.0.2 (5s GSM+CDMA): iPhone_4.0_64bit_11.0.2_15A421_Restore.ipsw
11.0.2 (6+): iPhone_5.5_11.0.2_15A421_Restore.ipsw
11.0.2 (6): iPhone_4.7_11.0.2_15A421_Restore.ipsw
11.0.2 (6s): iPhone_4.7_11.0.2_15A421_Restore.ipsw
11.0.2 (6s+): iPhone_5.5_11.0.2_15A421_Restore.ipsw
11.0.2 (SE): iPhone_4.0_64bit_11.0.2_15A421_Restore.ipsw
11.0.2 (7 GSM+CDMA): iPhone_7_11.0.2_15A421_Restore.ipsw
11.0.2 (7+ GSM+CDMA): iPhone_7Plus_11.0.2_15A421_Restore.ipsw
11.0.2 (7 GSM): iPhone_7_11.0.2_15A421_Restore.ipsw
11.0.2 (7+ GSM): iPhone_7Plus_11.0.2_15A421_Restore.ipsw
11.0.2 (8 GSM+CDMA): iPhone10,4_11.0.2_15A421_Restore.ipsw
11.0.2 (8 Plus GSM+CDMA): iPhone10,5_11.0.2_15A421_Restore.ipsw
11.0.2 (8 GSM): iPhone10,4_11.0.2_15A421_Restore.ipsw
11.0.2 (8 Plus GSM): iPhone10,5_11.0.2_15A421_Restore.ipsw
Read more ...

Samsung J7800 clone mtk6572 flash file free download

Samsung J7800 clone mtk6572 flash file free download 


MT6572__Samsung__SM-J800FN__j7209__4.2.2__J7209_6.0.1_4ECDJ_V1.0_20170516-1434

Brand     : Samsung
ProdName  : SM-J800FN
ProdModel : SM-J800FN
Device    : j7209
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : J7209_6.0.1_4ECDJ_V1.0 20170516-1434

[Read Ok] : preloader_j7209.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / j7209 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 650 MiB

Read more ...

LG H901 V10 fastboot mode only done

LG H901 V10 fastboot mode only done


need lg h901 testpoint 




Log


Welcome to Medusa Pro Software version 1.4.5.
Started.
Reader #0: Generic EMV Smartcard Reader 0

Model Settings:
Interface : USB
Core : Qualcomm MSM8992
Loader : QLoader_v1

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_009690E1
Core : Qualcomm MSM8992
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB
Connect successful.
---------------------------------------------------------------
SW: 1.4.5; FW: 1.1.0.
P00: GPT (00000000, 00004000)
P01: modem (00004000, 0002B000)
P02: spare1 (0002F000, 00001000)
P03: pmic (00030000, 00000400)
P04: sbl1 (00030400, 00000800)
P05: tz (00030C00, 00000800)
P06: sdi (00031400, 00000400)
P07: hyp (00031800, 00000400)
P08: rpm (00031C00, 00000400)
P09: aboot (00032000, 00001000)
P10: sbl1bak (00033000, 00000800)
P11: pmicbak (00033800, 00000400)
P12: hypbak (00033C00, 00000400)
P13: tzbak (00034000, 00000800)
P14: rpmbak (00034800, 00000400)
P15: abootbak (00034C00, 00001000)
P16: sdibak (00035C00, 00000400)
P17: limits (00036000, 00000400)
P18: apdp (00036400, 00000400)
P19: msadp (00036800, 00000400)
P20: dpo (00036C00, 00000400)
P21: spare2 (00037000, 00001000)
P22: persistent (00038000, 00000400)
P23: devinfo (00038400, 00000800)
P24: spare3 (00038C00, 00003400)
P25: misc (0003C000, 00008000)
P26: persist (00044000, 00010000)
P27: modemst1 (00054000, 00000C00)
P28: modemst2 (00054C00, 00000C00)
P29: fsg (00055800, 00000C00)
P30: fsc (00056400, 00000400)
P31: ssd (00056800, 00000400)
P32: keystore (00056C00, 00000400)
P33: DDR (00057000, 00001000)
P34: sec (00058000, 00000400)
P35: encrypt (00058400, 00000400)
P36: eksst (00058800, 00000400)
P37: rct (00058C00, 00000400)
P38: spare4 (00059000, 00003000)
P39: laf (0005C000, 00018000)
P40: boot (00074000, 00014000)
P41: recovery (00088000, 00014000)
P42: drm (0009C000, 00005000)
P43: sns (000A1000, 00003000)
P44: mpt (000A4000, 00010000)
P45: raw_resources (000B4000, 00002000)
P46: raw_resourcesbak (000B6000, 00002000)
P47: factory (000B8000, 00017000)
P48: spare5 (000CF000, 00001000)
P49: fota (000D0000, 00005000)
P50: fau (000D5000, 00007000)
P51: system (000DC000, 0085E000)
P52: cache (0093A000, 00268000)
P53: userdata (00BA2000, 068D9800)
P54: grow (0747B800, 000007DF)
Opening C:/Users/MT MART/Documents/MEGAsync Downloads/h90120l_00_1004.kdz file...
Write data verification is enabled.
Writing. Please wait...
Writing partition PrimaryGPT... Done.
Writing partition modem... Done.
Writing partition pmic... Done.
Writing partition sbl1... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Writing partition hyp... Done.
Writing partition rpm... Done.
Writing partition aboot... Done.
Writing partition sbl1bak... Done.
Writing partition pmicbak... Done.
Writing partition hypbak... Done.
Writing partition tzbak... Done.
Writing partition rpmbak... Done.
Writing partition abootbak... Done.
Writing partition sdibak... Done.
Writing partition persist... Done.
Writing partition sec... Done.
Writing partition rct... Done.
Writing partition laf... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition raw_resources... Done.
Writing partition raw_resourcesbak... Done.
Writing partition factory... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition BackupGPT... Done.
Writing is finished.
SW: 1.4.5; FW: 1.1.0.

Produce-


You can try connect this device via USB and do "Factory Repair" with Medusa Pro Software using the latest original LG firmware for this phone (in "*.dz", "*.kdz" or "*.tot" format).

To do "Factory Repair" via USB, try to do the following:

1. Install the latest Medusa Pro Software version (Medusa Website).
2. Select "USB" option in Software.
3. Select "CPU (Core) : Qualcomm MSM8992".
4. Select "Loader : QLoader_v1".
5. Connect the phone in "Qualcomm...9008" Mode to PC. If necessary, use Test Point.
6. Press "Connect" button in Software.
7. When device will be connected successfully, do "Factory Repair" ("Factory repair" tab in Software) using the latest original LG firmware version for this phone model.

You can find and request firmwares here: Flash file collection KDZ format.


Read more ...

Lenevo A7020a48 dead boot repair done

Lenevo A7020a48 dead boot repair done

lenevo a7020a48 dead boot_mtmart.net

MT6755

Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D42074B35A8DC631F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xABD5AB6B9683A43339D39A9AF21E449E
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

[Processing] FlashMemory Read-Write test
[eMMC] : [SAMSUNG] , BM41X , 0x747C00000 , 29820 MiB
[eMMC] : CID : 150100525831344D42074B35A8DC631F

[eMMC] : MODE : SQ-WR
[PASSED] : eMMC RW Check #1 Ok!
[eMMC] : MODE : RA-WR
[PASSED] : eMMC RW Check #2 Ok!

[eMMC RO CHECK] : eMMC Ok! READ-WRITE Passed!


File download


Read more ...

Samsung SM-N9002 emergency call only done

Samsung SM-N9002 emergency call only done

File download password protected


Solution- Write N9002 Cert with qcn N9002

Checking CERT file... Ok
KEY ID: 0813
Waiting ADB device... Ok
Reading phone info...
Model: SM-N9002
Android version: 4.4.2
Product code: SM-N9002ZWACHU
Phone version: N9002ZNUFNK1
PDA version: N9002ZNUFNK1
CSC version: N9002CHUFNK1
CSC country code: China
CSC sales code: CHU
HW version: MP 0.600
Phone SN:
Modem board: MSM8274
RF cal date: 2014.01.14
IMEI: 357555xxx327X
Writing AT RIL... Ok
Initialization AT RIL... Ok
Bypass MSL... Ok
Checking for compatible phone and cert... Ok
Phone KEY ID: 0813
Writing CERT... Ok
Checking CERT status... Ok
Rebooting phone... Ok

Done with Samsung Tool PRO v.28.2
Read more ...

Huawei Honor 3C (H30-U10) Stock Rom / Firmware H30-U10_V100R001C900B320

Huawei Honor 3C (H30-U10) Stock Rom / Firmware


HONOR 3C



Huawei Honor 3C (H30-U10) cpu spec Mediatek MT6582, Quad-core 1.3 GHz
Cortex-A7 with 8 GB Internal ROM, 2 GB RAM and Mali-400MP2 using Emotion
Lite UI. Read full specs Here

You can use these Stock firmware to :
    • Update Huawei Honor 3C (H30-U10)
    • Downgrade Huawei Honor 3C (H30-U10)
    • Rollback firmware Huawei Honor 3C (H30-U10)
    • Unroot Huawei Honor 3C (H30-U10)
    • Unbrick Huawei Honor 3C (H30-U10)
    • Restore Huawei Honor 3C (H30-U10)
    • Repair solutions for Huawei Honor 3C if boot loop, Hard brick, Lost recovery, or can’t boot to home screen, etc.
Notes :
    • How to Flash Huawei Honor 3C (H30-U10) Stock Firmware using Sp-Flashtool —>Soft brick Read Here Hard brick UFI Easy Jtag
    • Unlocking bootloader Huawei Honor 3C (H30-U10)  Unlock bootloader by sptool
Read more ...

Popular Posts