Huawei Y300-0100 emmc read only done

 Huawei Y300-0100 emmc read only done

boot file and pinout inside

here is emmc pinout




here is log 
just remove write protection.

Z3X EasyJtag Software ver. 2.0.3.0Loading eMMC Addon Firmware... IO: 2800 mVBox S/N: 0B00A0127411F87F, ,FW Ver.: 01.52CMD Pullup Level:1175 mVCMD Active Level:1577 mVeMMC Device InformationEMMC CID : 150100534A53303041030F775CBA11D4
EMMC CSD : D02701320F5903FFF6DBFFE78A406032
EMMC Manufacturer ID: 0015 , OEM ID: 0100EMMC Date: 01/2014 Rev.0x3EMMC NAME: <b>SJS00A</b> , S/N: 259480762EMMC NAME (HEX): 534A5330304100 EMMC ROM1 (Main User Data) Capacity: 3728 MBEMMC ROM2 (Boot Partition 1) Capacity: 1024 kBEMMC ROM3 (Boot Partition 2) Capacity: 1024 kBEMMC RPMB (Replay Protected Memory Block) Capacity: 128 kBEMMC Permanent Write Protection: <b>Yes<b>EMMC Temporary Write Protection: NoExtended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.Backup saved: SJS00A_ 259480762_20150705_2220.extcsdDone.
Running:SAMSUNG: Remove Write Protection...Z3X EasyJtag Software ver. 2.0.3.0Skip loading eMMC Addon FirmwareCMD Pullup Level:2165 mVCMD Active Level:2691 mVRemoving write protection...Done.
Z3X EasyJtag Software ver. 2.0.3.0Loading eMMC Addon Firmware... IO: 2800 mVBox S/N: 0B00A0127411F87F, ,FW Ver.: 01.52CMD Pullup Level:2186 mVCMD Active Level:2691 mVeMMC Device InformationEMMC CID : 150100534A53303041030F775CBA11D4
EMMC CSD : D02701320F5903FFF6DBFFE78A404056
EMMC Manufacturer ID: 0015 , OEM ID: 0100EMMC Date: 01/2014 Rev.0x3EMMC NAME: <b>SJS00A</b> , S/N: 259480762EMMC NAME (HEX): 534A5330304100 EMMC ROM1 (Main User Data) Capacity: 3728 MBEMMC ROM2 (Boot Partition 1) Capacity: 1024 kBEMMC ROM3 (Boot Partition 2) Capacity: 1024 kBEMMC RPMB (Replay Protected Memory Block) Capacity: 128 kBEMMC Permanent Write Protection: NoEMMC Temporary Write Protection: NoExtended CSD rev 1.5 (MMC 4.41)

here is boot file

DOWNLOAD
Free Download